TKP INC. © 2017

TKP-AR

Designed for the most demanding conveying conditions in mining, metallurgy, dredging and other applications where fluids are high in solids that cause abrasion wear. 

 
KEY ADVANTAGES

Beside the must known advantages of the PE pipe, we want to point out the following we have already improve with the use of TKP-AR pipe: 

  • The modified polymer of the inner wall of the pipe TKP-AR, allows the selection of the DR is carried out less overrated by prevention to the wear.

  • Having a smaller wall thickness, the inside diameter increases, as well as the volume of the ow, the e ciency and productivity of the line.

  • The pipe is lighter, easier to handle and install in the field.

  • If you decide to maintain the DR of the pipe, the wear by abrasion is the half, therefore the life of the line increases to double.

  • The frequency to rotate the pipe also decreases in half, consequently the cost and time invested for this process also decreases. 

APPLICATIONS

The main application of the TKP-AR pipe is in the Mining Industry:
Most of the uses of the PE pipe in the mining industry are extremely
related with the pipe’s ability to endure the strong abrasion attack of the fluids conveyed.
Slurries, Muds and even minerals in powder, are the must usual forms of the uids and the extremely smooth internal surface of the PE-Pipe has always be an advantage in the working life of the pipe. 

PE4710 pipe’s life is serveral times the other materials pipe’s life, like iron, steel, FRP, etc.
The TKP-AR is been scientifically develop to last longer than the PE4710 or PE100 pipes, using the same working pressure, joining the pipe with butt fusion, and with the complete set of fittings. 

Expressed weights are only approximate, and informative, they do not constitute a specification. In case of requiring a specific size not included in this table please contact TKP os visit www.tkp.mx 

TECHNICAL TESTS

The development of the pipe, TKP-AR, is a combination of technical efforts between TKP and our world leader supplier of plastics.

 

Our prototypes were carefully tested in the facilities of our world leader supplier, in Freeport Tx.

 

After more than 600,000 cycles, TKP – AR pipe, show the following results compared to a standard PE4710 pipe:

* For more information about our Chemical Agents, visit our section Technical Information
LOCATION

9801 Westheimer Rd. Suite 302

Houston, TX 77042

Phone: +1 (713) 470 1192

Email:  info@tkp.mx

OFFICE HOURS
SUBSCRIBE
  • Grey Facebook Icon
  • Grey LinkedIn Icon
HELP